Aqua Roof Primer 619
Aqua Roof Primer 619
For priming highly absorbant surfaces on roofs made of fibre cement. Regulates the absorbancy and creates a stable surface for an additional coating.
Please enter here the surface size in m².
m2
result at a averaged usage from 5 m² / l:
per coat of paint
Please consider: the usage values are ca.-values and could varied depending on the constitution of the underground
Primer for fibre cement
- Good penetration depth
- Regulates absorbency and strengthens the substrate
- Basis for painting with Jaeger roof and gutter paint 626
For priming highly absorbent substrates on fibre cement roofs. Regulates absorbency and creates a stable substrate for further coating.
Preparation of the substrate
- The substrate must be clean, dry and capable of being coated. Thoroughly remove grease, oil, moss or other impurities. Remove loose layers.
- Leaks can be sealed with Jungkeit Waterproof.
Coating structure
Apply 1-2 x as much as the substrate absorbs, avoid puddles, and immediately disperse any puddles that may form.
Processing conditions
During the entire processing and drying time, the material, substrate and air temperature must not fall below 8°C or exceed 30°C. The humidity should be between 30% RH and 75% RH during the entire time.
Tool cleaning
Clean with water immediately after use.
product data
spreading rate
| paint/roll | spraying |
|---|---|
| 5 m²/ltr. |
item number/shade
| item number | shade |
|---|---|
| 619-6000 | grün lasierend |
size of trading unit/box content
| size of trading unit | box content |
|---|---|
| 750 ml | 6 |
| 2,5 l | 6 |
suitable products
