Bath renovation systemFloor coatingsOffice PaintsRoof protectionSeamless wall and floor fillerAnti-graffiti systemPrimers Radiator LacquerWood lacquer-/sealInsulating and sealing paintsLÖWE corrosion protectionMarking paintsMetal ProtectionPoolcoatRenovation paintsAnti-Slip-CoatingFillersSpecial protection lacquersDecorative TechniquesSpecial thinners / cleaning agentsTools/Accessories
Radiator Lacquer

Sinolin® Radiator Lacquer Spray 278

Radiator Lacquer
Sinolin® Radiator Lacquer Spray 278
Radiator paint in the spray can. High heat resistant up to approx. 150°C. Does not yellow; good filling power, excellent covering power; good flow.
Heizkörperlack in der Spraydose
usage calculator
Please enter here the surface size in m².
m2
result at a averaged usage from 4.5 m² / l:
per coat of paint
Please consider: the usage values are ca.-values and could varied depending on the constitution of the underground
DownloadDownload this file

Heat-resistant synthetic resin enamel for radiators

  • No chipping or cracking
  • Good filling power
  • Excellent covering properties
  • Good flow
  • No embrittlement
  • Impact and shock resistant
     

Sinolin® Heizkörperlack Spray 278 offers a practical and efficient solution for painting radiators. This spray variant of the heat-resistant synthetic resin varnish is ideal for hot water and steam heating systems and is characterised by high heat resistance. Even with short-term thermal overloading up to about 150°C, no chipping or cracking occurs. The spray enables easy and even application, even in hard-to-reach places, and impresses with its excellent coverage and good flow without running down vertical surfaces.

+ Painting radiators: step-by-step instructions for painting radiators

 

Heizkörperlack wird auf einen Heizkörper gesprüht
Der Heizkörper wird vor dem Lackieren angeschliffen

1. Schritt: Heizkörper anschleifen

Der Heizkörper wird vor dem Streichen mit einer Bürste von Staub und Schmutz befreit

2. Schritt: Schleifstaub entfernen.

Weißer Heizkörper wird mit Sprühdose lackiert

3.Schritt: Heizkörper mit der Sprühdose lackieren.

 

Substrate

Factory-applied primers must comply with the technical delivery conditions for radiator primers according to DIN 55900. Aluminium primers are unsuitable.

 

Paint structure

Generally, one coat is sufficient. Two coats are recommended if white paint is to be applied to a dark primer. If necessary, prime with Multigrund-Spray 714 or Multigrund 715. Do not paint on warm or hot radiators.

 

Preparation

Remove any loose and peeling old paint. Thoroughly sand well any old paint that is still firmly attached. Prime bare patches and then paint or spray the radiator once with Sinolin® Radiator Paint Spray 278.
 

Processing conditions

During the entire processing and drying time, the material, substrate and air temperature must not fall below 8°C or exceed 30°C. The humidity should be between 30% r.h. and 55% r.h. during the entire time.

 

product data

spreading rate

paint/roll spraying
ca. 1,5-2 m²/400 ml

item number/shade

item number shade
278-9010 weiß hochglänzend
278-0002 weiß seidenglänzend

size of trading unit/box content

size of trading unit box content
400 ml6